Conventional sewage pumps are mainly WQ submersible sewage pumps with submersible function that can be placed in sewage to pump water, and they are placed on the ground to suck sewage from low sewage tanks into the pump to discharge it through the sewage pump. A kind of self-priming sewage pump products, other sewage pumps, are there other sewage pump products that have the self-priming capability and are installed on the ground for secondary pressurization, such as: LW vertical sewage pump or GW pipeline sewage pump, these two Both of the sewage pumps are installed vertically. The difference between the inlet and outlet of the GW pipeline sewage pump is the same horizontal line, and the import and export standard of the LW vertical sewage pump is shipped in a zigzag manner, but the difference is that the direction of the inlet and outlet can be adjusted according to needs. Rotation adjustment makes it convenient to adjust the direction required on site.
Can the sewage pump pump mud?
Regarding the question of whether the sewage pump can pump mud, many users want to know it clearly, and this must be understood. Then we must tell everyone here that the sewage pump can pump mud or sludge, but the prerequisites need to be increased. The power of the sewage pump can be used because the mud ratio is much larger than that of the sewage. For example, the original sewage pump motor power is 0.75KW. The power of the sewage pump is designed and configured based on the specific gravity of the sewage within 1.05. If the user pumps If the specific gravity of the mud is within 1.84g/cm3, then if the sewage pump is used for sludge pumping, then the sewage pump motor power should be selected as 1.5KW or 2.2KW or more in this case. What needs to be noted here is to use the sewage pump for sewage pumping. Mud and sludge must be a medium that can flow in a liquid state. For sludge pumping, a sewage pump with a low speed should be used for better effect.
If you need a high-pressure water gun to flush the sludge in conjunction with the sewage pump to pump the cement slurry in the pond dredging and pumping the sludge in the pond, in this case someone may stand in the remaining sludge at the bottom of the pool. We recommend not to use a submersible sewage pump in this working condition. , Because the whole body of the submersible sewage pump is submerged in the mud, it is not safe if it is used, and it is dangerous if there is leakage. So what kind of sewage pump should be used? In this case, we suggest to use the high suction screw self-priming pump of Boyu Pump Company, because the impeller of this series of self-priming pump adopts a spiral impeller, and the motor is equipped with a low-speed motor. A medium similar to sludge slurry works well. After the vacuum assist system is configured, the suction is very large. You only need to use a portable hose for the suction pipe to submerge the hose into the mud and start the equipment to suck up the mud in the pool. Through this self-priming pump, it can be transported to other destinations. This series of high-lift self-priming sewage slurry pumps can pump dirty cement slurry.